AMD launches Beema, boasts huge efficiency improvements

Puma+ CPU cores, 128 GCN shaders

AMD's new low-power Beema APUs are official and just as we expected the new parts are significantly more efficient than Kabini products. It's not all about efficiency, the new chips also have some fresh features, but the basic concept is the same - up to four low-power CPU cores, 128 GCN cores.

The company claims a 2X advantage in compute performance-per-watt compared to competing processors. The new chips offer a 50% improvement in clock speeds at nearly half of the TDP of the previous generation (Kabini). GPU performance-per-watt has been practically doubled compared to Temash parts.

AMD's biggest selling point is efficiency, so let's start there, right after we take a look at the branding of the new parts.

AMD's new branding for Beema and Mullins

AMD has three new low-power Mullins parts and it also has new branding for the tweaked cores. Mullins parts can be distinguished from Beema products quite easily, as they sport a Micro prefix in their designation.

The E1 Micro-6200T is a dual-core clocked up to 1.4GHz with a 3.95W TDP (2.8W SDP). It features Radeon R2 graphics, i.e. 128 GCN cores clocked at 300MHz and it can handle DDR3L-1066 memory. The A4 Micro-6400T is a quad-core clocked at 1.6GHz. It has a TDP of 4.5W (2.8W SDP) and Radeon R3 graphics clocked at 350MHz. The quad A10 Micro-6700T is the fastest Mullins chip, with a CPU clock of 2.2GHz and Radeon R6 graphics clocked 500MHz. Both A-series parts feature the same TDP/SDP, 2MB of L2 cache and support for DDR3L-1333 memory.

Beema starts off with four different SKUs, two A-series and two E-series products. The E1-6010 is the slowest of the bunch, with two CPU cores clocked at 1.35GHz, Radeon R2 graphics clocked at 350MHz and a 10W TDP. The E2-6110 is a 15W quad-core clocked at 1.5GHz, with Radeon R2 graphics clocked at up to 500MHz.

The A4-6210 and the A6-6310 are quad-core 15W parts. The A4-6210 is clocked at 1.8GHz and it sports R3 graphics clocked at 600MHz. The flagship A6-6310 is clocked at 2.4GHz, with R4 graphics clocked at up to 800MHz. It also supports DDR3L-1866 memory.

Compared with previous generation Kabini and Temash parts, the new APUs feature substantially lower TDPs across the range. Both CPU and GPU clocks have been bumped up. AMD did not add more CUs, so we're still looking at 128 GCN cores, but the GPU clocks are quite a bit higher.

Optimised power, reduced leakage

The basic approach is the same, so what did AMD do to boost efficiency and clocks? The company claims a 19% leakage reduction in the CPU department and a 38% reduction in the GPU. In addition, AMD tweaked thermal monitoring by taking more temperature readings on both the core and the package. This allowed designers to unlock higher frequencies, especially in boost mode, i.e. when opening websites, starting applications and so on.

Low-voltage parts aren't meant for demanding applications, so the standard usage scenario does not involve more than a few minutes under full load. As a result AMD can afford to bump up clocks without negatively effecting the overall TDP, as the chips usually don't run at the top clock long enough to make much of a difference. AMD calls its new trick Skin Temperature Aware Power Management (STAMP). The company claims STAMP can also extend battery life by completing tasks in less time, thus compensating for the extra energy expended at higher clocks.

AMD also tweaked its boost algorithms and power management. Thanks to reduced leakage, STAMP and other optimizations, Beema is about 20 percent more efficient than Kabini, so it allows AMD to squeeze more performance into the same thermal envelope.

Bold performance claims

AMD says the new parts offer a 10% GPU boost compared to the previous generation, with a twofold improvement in GPU performance-per-watt. AMD picked a few APU-loving benchmarks to compare Beema to Haswell and Bay Trail-M parts. The new APUs can beat the Pentium 3556U (Haswell) and the Pentium N3510 (Bay Trail) in PCMark 8, Basemark CL, 3DMark11. In the same test Mullins parts beat Bay Trail-T.

Naturally these benchmarks were chosen by AMD to prove a point, as they tend to like chips with snappier graphics and better OpenCL capabilities. In CPU-bound tests, the results should be quite different. While they don't paint the full picture, the benchmarks are impressive, especially when you consider the prices of Haswell Y and Haswell U parts. Furthermore, Intel needs two architectures to cover this market segment (Haswell and Bay Trail), while AMD relies on just one, with superior pricing.

Beema/Mullins is AMD's first APU with a Platform Security Processor (PSP). This is basically an on-die Cortex A5 processor with dedicated ROM and SRAM. It also features a cryptographic co-processor capable of handling RSA, SHA, ECC, AES and a few other crypto standards. While PSP may not be a big deal for home users, it should come in handy for embedded applications. We will take a closer look at AMD's PSP and a few other Beema features later.

Overall AMD appears to have done a rather good job. Beema was never meant to be a huge update, it's evolutionary rather than revolutionary, but the efficiency gains are very impressive indeed. Kabini and Temash were good performers, but Bay Trail parts offered a lot more efficiency making them a better fit for many form factors (namely tablets and hybrids). Their biggest competitive disadvantage had nothing to do with performance, it was all about efficiency. With Beema and Mullins AMD has closed the gap, almost.

Lokasi:

Share :